HYDOR - Koralia Evolution Water Pump - 1050 Gph

Product Description

$111.49 CAD

DESCRIPTION
DETAILS
FACTS
DIRECTIONS
WARNINGS

Energy-saving compact pump, ideal for recreating the natural movements of river and sea water. Equipped with magnetic suction cups, it can be linked to a timer, with intervals set in seconds, minutes or hours.

The Koralia Evolution is an improved Koralia with higher flow and lower power consumption than the traditional Koralia. Ideal for marine and reef tanks, these pumps simulate natural ocean currents within your aquarium system. The Evolution series pumps include several innovations including: a new and improved vibration absorbing magnet-suction cup mounting system for secure placement, a more compact design making them easier to conceal, and a new shaft-less impeller technology and unique impeller design allowing for a wide and gentle flow pattern. The Koralia Evolution pumps consume 50% less power, while providing 20% more water flow. They are also controllable, as they can be connected to a timer such as the Hydor Smartwave pump controller.

Package Description: 1050 Gph

Serving Size: ..

Number of Servings: ..

MODEL	W	FLOW RATE	FOR AQUARIUMS *
			fresh water	marine

115V - 60 Hz
KORALIA 550	4	550 gph	from 30 to 50 gal	from 15 to 30 gal
KORALIA 750	4	750 GPH	from 50 to 90 gal	from 30 to 50 gal
KORALIA 1050	5	1050 gph	from 70 to 125 gal	from 45 to 70 gal
KORALIA 1400	6	1400 gph	from 90 to 160 gal	from 55 to 90 gal

* Aquarium sizes in the above chart are suggested by Hydor. Each Hobbyist should choose the Koralia model that better suits the needs of the inhabitants (plants, fish, corals, etc) of the aquarium in which the pump(s) will operate.

TYPE	USA CODE
KORALIA 550	P29251
KORALIA 750	P29301
KORALIA 1050	P29401
KORALIA 1400	P29501

Installation
Note: Please verify that all components of the pump are undamaged before putting it into function. To prevent noise and disturbance caused by vibrations, position the pump so it avoids lateral contact with the aquarium glass. Avoid placing the Koralia Evolution in an upward position on the bottom.

Unwind the electric cable.
Insert the cylinder on the sphere attachment to the pump in the proper slot.
Immerse the pump completely and turn it in a vertical position in order to allow any air to come out of the impeller chamber.
Attach the pump with the internal part of the suction cup and magnet support to the aquarium side. Be sure to clean the surface before attaching the support.
Adjust flow direction as desired.
Connect to electrical supply.

Maintenance
Note: Before any kind of intervention, always disconnect electrical supply of the pump and any other appliance placed in the water.

Regular cleaning and maintenance will guarantee the pump better and longer performance.
With one hand, hold the pump assembly. Use your other hand to remove the external magnet.
Disassemble the unit.
Clean the impeller assembly, the chamber and the bearings removing deposits with a soft brush. Do not use detergents or solvents.
If necessary, clean the grid of the lower and upper chamber by putting it under running tap water or using a soft brush to remove algae and other residue.
Reassemble everything in reverse order. Make sure that the bearings are positioned correctly, allowing the rotor correct axial movement. Make sure the rotor holder is placed correctly.
In case of abnormal noise and reduced performance caused by sudden changes in electricity supply, restart the pump.

General Information
The Koralia Evolution is a new innovative range of circulation pumps for aquariums. The exclusive Hydor design and technology guarantee a continuous and powerful water flow, which can be directed freely thanks to the special sphere shaped connection to the exclusive combination suction cup and magnet support. The Koralia Evolution boasts high performance, low energy consumption and quick and easy maintenance. The combination suction cup and magnet can safely hold the Koralia Evolution pumps onto aquarium glass up to 1/2 inch thick.

Note: Koralia Evolution pumps are specially designed for use in aquariums and tanks for water movement. It is not a filtration pump.

Aquarium use only! Keep away from children.

Before installation or maintenance, or before putting your hands into the aquarium, remove the power supply from all the electrical devices under water. Read the instructions.