• Headlights guaranteed to pass inspection for the lifetime of your vehicle
• Easy to apply, lasts through hundreds of car washes
• Apply once and lasts for years while saving time and money
• Clear your lens in just seconds
• Made in the USA

Package Description: 1 Kit

Serving Size: ..

Number of Servings: ..

• 1 Precision Wipe-It Infused with Wipe New.
• 1 Professional Lens Polishing Pad.
• 1 Pair of Nitrile Gloves.
• 1 Microfiber Drying Towel.

1) To determine whether you need to use the Professional Lens Polishing Pad, pour water onto your headlight lens. The way the lens looks when wet is the way it will appear once treated with Wipe New. If the lens appears crystal clear when wet (and hazy only when dry), then you do not need to use the Lens Polishing Pad. Simply wash the lens with soap and water, rinse, and proceed to step 4. If the lens is cloudy/hazy when wet, proceed to step 2.

2) Wet the headlight lens with water and use the green side of the Lens Polishing Pad to wetsand the headlight lens and remove oxidation. Ensure the lens remains wet while using the Polishing Pad. The oxidation coming off the lens will appear as a brownish colored liquid; continue to rub until this visual indicator is no longer present. IMPORTANT: Do not allow the Polishing Pad to come into contact with painted surfaces as it may scratch these surfaces.

3) Re-wet the headlight lens and use the gray side of the Professional Lens Polishing Pad to further polish the headlight lens.

4) Dry the lens thoroughly with the included microfiber towel and inspect the surface to ensure oxidation has been removed. If not, repeat steps 2 and 3 on any missed spots. When you can see through the lens while wet, you are ready to apply Wipe New. Repeat steps 1-4 on the all headlights, so that both are prepped and ready at the same time to apply Wipe New. Ensure all lenses are 100% dry prior to proceeding to step 5.

5) Put on the chemical resistant gloves, ensure that you are in a well ventilated area and that the headlight lenses are completely dry. Tear open the Wipe-It packet, pull out the applicator cloth and carefully wipe the lens ONE TIME, being careful not to get any Wipe New onto the surrounding paint. If treating multiple lenses, do so before the Wipe-It dries out.

6) When finished, set the applicator cloth in a location out of the reach of children and allow it to dry completely prior to discarding (a few hours). The headlights will dry to the touch in about 1 hour. Do not allow treated lenses to come in contact with direct moisture (rain, dew, etc) for 24 hours.