Is it really a UTI? Find out with AZO TEST STRIPS the same UTI test that doctors use and trust.

Treating a urinary tract infection early is the key to fast relief and preventing more serious problems. With AZO TEST STRIPS, you can take a UTI test at home safely and simply, then call your doctor with the results.

• The same UTI test that most doctors use to diagnose a UTI.
• Two tests in one - including both Leukocyte (white blood cells) and Nitrite tests.
• Easy to use and read in just 3 simple steps.
• Test results are ready to read in just two minutes.

Package Description: 3 Test Strips

Serving Size: ..

Number of Servings: ..

Easy to use: Simply wet the test pads by holding in your urine stream for 1-2 seconds.

Easy to read: Match the color of the test pads to the color blocks on the foil pouch.

Directions

Before you start the test, gather the materials you need:

• AZO TEST STRIPS
• Absorbent material (e.g. paper towel)
• Timer or watch with a second hand
• Pen or pencil (optional)
• Clean, dry cup (optional)

Read all directions.

• Wash your genital area thoroughly with soap and water. Rinse with clear water.
• Remove one test strip from the foil pouch.
• Do not touch the test pads of the strip. Discard any discolored strips that may have deteriorated.
• Note: Your results will be more reliable if you test your first urine in the morning or urine held in the bladder for at least 4 hours.

Simply follow these 3 easy steps...

Step 1: Apply urine to pads.

Begin urinating. After some urine has passed, hold the test pads in the urine stream for 1-2 seconds. Make sure both test pads are wetted. (If you prefer, you may collect your urine in a clean, dry cup. Then dip the test strip in the urine.)

Immediately bring the edge of the test strip into contact with an absorbent material (e.g. paper towel) to remove excess urine. Lay the test strip with the test pads facing upwards on the paper towel.

Step 2: Begin timing.

Step 3: Read test results at 1 minute for Nitrite and at 2 minutes for Leukocytes.

Compare the test pads to the color blocks on the foil pouch. Hold the strip close to the color blocks and carefully match each test pad to the color chart for that test.

Match the color of each test pad to the color chart for that test. Any amount of uniform pink color on the nitrite test pad is positive (abnormal). Pink spots or pink edges are not a positive result. A positive WBC test will give a dark tan to purple color. (Ignore any color change after you have read the test pads at 2 minutes).

How to read your test results.

If you would like, you can record your results to assist you in understanding your results.

(Example) N = Negative P = Positive

Use the following table to determine what your test results mean. Remember, they are only one piece of information your doctor needs in order to treat you.

Be sure to keep the bottle cap tightly closed after removing a test strip. Do not remove the drying packet.

Store at room temperature 59-86F (15-30C) out of direct sunlight. For in vitro (external) diagnostic use.