• Glass aquarium cleaner
• Recommend to be used on aquariums up to 350 gallons with a surface thickness up to 5/8
• Product dimensions: (3 ¼ x 2 ½ x 1)

Package Description: 2 1/4" x 3 1/4"

Serving Size: ..

Number of Servings: ..

• Small Mag-Float - 2 3/8"L x 1 3/8"W x 1"H
• Medium Mag-Float - 3 7/8"L x 1 3/8"W x 1"H
• Large Mag-Float - 3 1/4"L x 2 1/2"W x 1"H
• Extra Large Mag-Float - 6"L x 2 1/2"W x 1"H

1. Clean the outside aquarium surface thoroughly before each use.
2. Do NOT use Mag-Float above waterline or on dry glass.
3. Use Mag-Float only on aquarium material, size, and thickness of glass specified.
4. Remove all debris from the Mag-Float prior to use.
5. Leave the Mag-Float attached to the aquarium surface.
6. DO NOT place magnets together outside of the aquarium after its initial use, unless:
   • Magnets are completely dry. For longer durability, maintain the felt on the magnet's dry side (logo side that is placed on the exterior aquarium surface). This portion of the magnet does not float.
   • KEEP THE Mag-Float AWAY FROM CHILDREN and electronic devices such as computers or pace makers.

Instructions on replacing the Mag-Float Pad/Felt

Note:

• Felt is applied to the magnet that contains the Mag-Float logo.
• Pad is applied to the magnet that does not contain the Mag-Float logo.

Step 1
Remove old Pad/Felt entirely without damaging the plastic surface of the magnet.

Step 2
Apply mineral spirits on a cloth and rub plastic surface until all excess glue is removed (glove use recommended).

Step 3
Wait until plastic surface is completely dry before applying new Pad/Felt.

Step 4
Peel back paper backing from new Pad/Felt approximately a quarter of the way.

Step 5
Line up the new Pad/Felt with the plastic surface area of the magnet.

Step 6
Apply pressure to the Pad/Felt area that has been peeled off so it glues onto the plastic surface of the magnet.

Step 7
Apply pressure to the rest of the new Pad/Felt as you slowly remove the rest of the paper backing. This will help prevent any air bubble to be formed between the plastic surface and the Pad/Felt.

• Magnets are completely dry. For longer durability, maintain the felt on the magnet's dry side (logo side that is placed on the exterior aquarium surface). This portion of the magnet does not float.
• KEEP THE Mag-Float AWAY FROM CHILDREN and electronic devices such as computers or pace makers.